Technical specifications¶
Absolute maximum ratings¶
Parameter | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Input Voltage (USB) | -0.3 | - | +5.7 | V |
Supply Output Current - MikroBUS +5V | - | - | 2.0 | A |
Supply Output Current - MikroBUS +3.3V | - | - | 2.0 | A |
Supply Output Current - Arduino +5V | - | - | 1.0 | A |
Supply Output Current - Arduino +3.3V | - | - | 2.0 | A |
Supply Output Current - Grove Vcc output | - | - | 1.0 | A |
Storage Temperature | -40 | - | +85 | °C |
Recommended operating conditions¶
Parameter | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Input Voltage (USB) | +2.5 | +5.0 | +5.5 | V |
Supply Input Current (WiFi off, LEDs & display on) | - | 70 | 90 | mA |
Supply Input Current (WiFi, LEDs & display on) | - | 105 | 150 | mA |
Power consumption (WiFi, LEDs & display on) | - | 0.5 | 0.75 | W |
Operation Temperature | -20 | - | +60 | °C |
Humidity Range / non-condensing | - | - | 95 | %RH |
STM32F413 operating frequency | - | 100 (1) | 100 | MHz |
(1) default configuration for the mbed target.
Wi-Fi Specifications (TI CC3120R)¶
Wi-Fi modes:
- 802.11b/g/n
Security:
- WPA2 Personal and Enterprise Security: WEP, WPA/WPA2 PSK, WPA2 Enterprise (802.1x)
- Secure Sockets: SSLv3, TLS1.0/1.1/TLS1.2 (integrated on the CC3210, newer versions can be further supported from the main MCU application)
- Secure Key Storage
- Software Tamper Detection
TX Power:
- 18.0dBm@1DSSS
- 14.5dBm@54OFDM
RX Sensitivity:
- -96.0dBm @ 1DSSS
- -74.5 dBm @ 54 OFDM
On-board PCB Antenna:
- Return loss @ WiFi bands (2.412-2.472 GHz): -19.4 dB max. (VSWR: 1.24:1)
- Bandwidth (defined @ VSWR 2:1): 200 MHz
External u-Fl connector:
- Characteristic impedance: 50 Ω
- Maximum output power: 18.0dBm
I/O Characteristics¶
All I/Os are CMOS and TTL compliant. The following characteristics are based on the STM32F423ZH datasheet:
Parameter | Min | Typ | Max | Unit |
---|---|---|---|---|
Input logic LOW level voltage | - | - | 0.9 | V |
Input logic HIGH level voltage | 2.3 | - | - | V |
Input hysteresis | 0.1 | - | - | V |
Weak pull-up equivalent resistor | 30 | 40 | 50 | kΩ |
Weak pull-down equivalent resistor | 30 | 40 | 50 | kΩ |
I/O pin capacitance | - | 5 | - | pF |
Notes:
- For I/O timings and maximum operating frequency of the different peripherals (I2C, SPI, UART, I2S) please refer to the STM32F413ZH datasheet.
- The main oscillator is driven by the external crystal Y4 (16.000 MHz ± 10 p.p.m.).
- The low frequency oscillator is driven by the crystal Y3 (32.768 kHz ± 20 p.p.m.).
Solid-state outputs characteristics¶
Parameter | Min | Typ | Max | Unit |
---|---|---|---|---|
ON-state current (continuous) | - | - | 2 | A |
ON-state current (pulsed, t=100 mseg, duty=10%) | - | - | 6 | A |
ON-state resistance (continuous) | - | 90 | 150 | mΩ |
Isolation voltage | 5,000 | - | - | V |
Maximum DC voltage (1) | - | - | 26 | V[dc] |
Maximum AC voltage (1) | - | - | 20 | V[rms] |
(1) Limited by the protection varistors (R63 and R69).
Mechanical Dimensions¶
Dimension | Value | Unit | Comment |
---|---|---|---|
External dimensions | 100.97 x 65.79 x 19 | mm | |
Mounting holes diameter | 3.25 | mm | for M3 screws size |
Mounting holes distances | 93.22 (X), 58.17 (Y) | mm |