Skip to content

Required accessories

  • NiMH battery; 5 cells, min. 3700 mAh (e.g., Conrad item no. 1784857)
  • Charger (e.g., Conrad item no. 1413029 or 1413030)
  • Adapter cable XT30 (e.g., Conrad item no. 1886426)
  • Batteries (2x AAA/Micro) (e.g., Conrad item no. 658010)
  • Screw locking (e.g., Conrad item no. 826389)
  • Mini-USB cable (e.g., Conrad item no. 1365369)

Optional: - Servo for Pan unit * (e.g., Conrad item no. 1762878) - Servo for tilt unit * (e.g., Conrad item no. 1762877) - Arduino UNO (e.g., Conrad item no. 191789) - Screw locking (e.g., Conrad item no. 1613301)

→ * The Pan & Tilt unit is the head mechanism (see Figure 1) and can optionally be printed on a 3D printer

Required tools and material: - Small side cutter (electronic side cutter) - Scissors - Open-end wrench SW 5.5 mm - Open-end wrench SW 4 mm - Phillips screwdriver PH1 - Phillips screwdriver PH2 - Hexagon socket 6 mm - Hexagon wrench 1.5 mm - Hexagon wrench 2.5 mm - Screw locking (medium strength) e.g., LOCTITE® 243 (Conrad item no. 1370555) - 90° Stop angle or straight edge - Work paper