M5GO IOT Starter Kit¶
Description¶
M5GO IOT Starter Kit is a kit designed for learning IOT programming which consists of 6 units(ENV, IR, RGB, PIR, ANGLE, HUB), one white M5Core(based on ESP32 chip) and a M5GO bottom.
Programming M5GO with UIFlow or Arduino IDE.
We also supply some courses for teaching IOT programming. If you are interesting in it, contact us through Email tech@m5stack.com please.
Feature¶
- Programming Support
- Arduino
- ESP-IDF
- MicroPython
- TF Card Support (Up to 16G)
PinMap¶
MainBoard Pinmap¶
LCD & TF Card
LCD Pixel:320x240 Maximum storage of TF Card: 16GB
| ESP32 Chip | GPIO23 | GPIO19 | GPIO18 | GPIO14 | GPIO27 | GPIO33 | GPIO32 | GPIO4 |
| ILI9341(LCD Driver) | / | MISO | CLK | CS | DC | RST | BL | |
| TF Card | MOSI | MISO | CLK | CS |
Button & Speaker
| ESP32 Chip | GPIO39 | GPIO38 | GPIO37 | GPIO25 |
| Button | BUTTON A | BUTTON B | BUTTON C | |
| Speaker | Speaker Pin |
GROVE A & IP5306
Power Management IC (IP5306) is a custom I2C version, and the IIC address of IP5306 is 0x75. Click here for view register manual.
| ESP32 Chip | GPIO22 | GPIO21 | 5V | GND |
| GROVE A | SCL | SDA | 5V | GND |
| IP5306 | SCL | SDA | 5V | GND |
9-axis IMU sensor(MPU9250)
I2C Address: 0x68
| ESP32 Chip | GPIO22 | GPIO21 | 5V | GND |
| MPU9250 | SCL | SDA | 5V | GND |
M5GO Base Pinmap¶
GROVE B
| ESP32 Chip | GPIO36 | GPIO26 | 5V | GND |
| GROVE B | GPIO36 | GPIO26 | 5V | GND |
GROVE C
| ESP32 Chip | GPIO16 | GPIO17 | 5V | GND |
| GROVE C | RXD | TXD | 5V | GND |
LED Bar & MicroPhone
| ESP32 Chip | GPIO15 | GPIO34 |
| LED Bar | SIG Pin | |
| MicroPhone | MIC Pin |
PARAMETER¶
| M5Core Source | Parameter |
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash & PSRAM | 16MB Flash |
| Input | 5V @ 500mA |
| Interface | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| LCD | 2 inch, 320x240 Colorful TFT LCD, ILI9342 |
| Speaker | 1W-0928 |
| Microphone | MEMS Analog BSE3729 Microphone |
| LED | SK6812 3535 RGB LED x 10 |
| MEMS | MPU9250 |
| Battery | 550mAh @ 3.7V, inside vb |
| Op.Temp. | 32°F to 104°F ( 0°C to 40°C ) |
| Size | 54 x 54 x 21 mm |
| C.A.S.E | Plastic ( PC ) |
NOTE:
We have several kinds of Cores, the following figures show the main differece with them.
-
If you want to view the detailed defference with them, please click here.
-
If you want to download the detailed defference with them, please click here.


Include¶
- 1x white M5Core
- 1x M5GO Base
- 6x Units
- 4x LEGO Accessories
- 3x GROVE Cables
- Type-C USB Cable
- User Manual



Related Links¶
Datasheet
Related Video¶
- m5stack instroduce